DIETZGEN Magic? RENEW 30 Mil 14.5 Oz Nonwoven Lightweight Banner (Matte)
Magic
Click Here
Product
Click Here
MAGIC RENEW is manufactured in New Hampshire USA.
The nonwoven material is 100% fiber.
There are no chemical ingredients used in its manufacture.
However, 50% of the fiber is a low melt polyester which does not come from bottle flake to produce.
The other 50% of the fiber uses bottle flake.
PRINTING TIPS
UV CURE suggested printer settings: Double Density / 5 pass
LATEX suggested printer settings: OEM?s ?Backlit? Setting
Use outer edge pinch rollers only, set to ? pressure
Turn cutters off
FINISHING TIPS
Cut with a utility knife.
Can be heat welded, sewn and grommeted. Heat weld at 425?-450?F.
For short term applications RENEW can be installed without hemming.
For long term applications RENEW can be heat welded or a hem can be sewn.
Once welded or sewn, grommet should be placed a minimum of 1 inch in from the corners or edge of the material.
Reinforce grommet area with a one to 2 inch patch of Renew under the backside grommet layer.
Grommets should be placed a minimum of 1 inch in from the corners or edge of material.
Reinforce grommet area with a one to 2 inch patch of Renew under the backside grommet layer.
