Fibron Heat Transfer Material
Fibron Heat Transfer Material for Plotters
? 4 Mil matte polyurethane with clear mylar liner, designed for use with plotters. 45? angle blade recommended
? With mirrored image, heat transfer graphic with heat press onto garment using firm pressure at 330-335? F for 17-20 seconds for most colors. Peel warm
? Works with cotton, polyester, spandex, lycra, and some athletic mesh fabrics. WILL NOT adhere to nylon
? See Installation bulletin for more information
? To ensure greatest durability, garments should be washed inside out on gentle cycle
? If applying to 100% cotton, we recommend washing the material first to remove excess lint and fuzz.
? Deco Sparkle patterns will not layer. They should be applied at 300?F for 10-12 seconds. Peel Cool. Cool wash, tumble dry low heat.
? Cobra, apply 330?F for 12-15 seconds, peel cool
? Fibron can be layered, except the Neons, Deco, and Metal Flake.
Polyurethane Garment Film
Product Description
A Matte polyurethane material designed to be used with vinyl plotters for cutting graphics for garments.
Fibron is thermal transferred with heat by a heat press on to cotton, blended fabrics, polyester fabrics, spandex and other fabrics. 100% cotton needs to be prewashed for best success. Will not adhere to nylon, dazzle cloth, shiny polyester or moisture wicking materials.
Note: Ironing on is not recommended.
Product Construction
? Film: Polyurethane
? Finish: Matte
? Thickness: 4 Mil
? Liner: Clear Mylar Carrier
? Durability: Life of the Garment
Application Recommendations
? Can be die cut and weeded with plotters.
? Note: Always Mirror Image or Reverse Cut
? Position weeded graphic on garment.
? Heat transfer graphic with heat press on to garment using FIRM HARD PRESSURE at 345-350?F for 20 seconds.
? Deco Sparkle materials should be applied with 300?F for 10-12 seconds, Peel cold. Deco Sparkle patterns will not layer.
? Cobra, apply 330?F for 12-15 seconds, peel cool
? Fibron can be layered, except the Neons, Deco, and Metal Flake.
? Remove Clear Mylar Carrier from garment.
? Be advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics
? It is recommended to reheat prints 10 seconds after removing the application tape for greater durability. Place a PTFE sheet or release liner over graphic before applying heating
* To insure greatest durability, decorated garments should always be turned inside out and washed in gentle cycle, cold water and tumble dry. Avoid use of bleach or detergents containing bleach.
